User Contributed MET/CAL PROCEDURE ============================================================================= INSTRUMENT: MET-270-3 DATE: 28-Oct-94 AUTHOR: User Contributed REVISION: ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 33 NUMBER OF LINES: 317 ============================================================================= STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 HEAD {Signal to Noise Ratio Test} 1.002 RSLT =WB1 only. 1.003 DISP Set the tape recorder to the following: 1.003 DISP Speed: 15IPS 1.004 DISP Connect the HP 3458A DMM to the REPRO MON BNC 1.004 DISP on the rear of the recorder. Connect a 50ê 1.004 DISP termination to the HP 3458A DMM. 1.005 DISP Set the Meter Monitor to display RMS. 1.005 DISP Set the Meter Monitor to monitor REC (white button 1.005 DISP above the REC LED to the right of the Meter Monitor). 1.006 DISP Select CHANNEL 1 with the UP/DOWN arrow keys 1.006 DISP located at the upper right of the control panel. 1.007 OPBR Is there a Record PCB in this channel slot? 1.008 JMPF 2.002 1.009 DISP Connect Fluke 5100B to CHANNEL 1 1.010 HEAD {Channel 1} 1.011 CALL SNR_Setup 1.012 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 2.001 HEAD { } 2.002 DISP Select CHANNEL 2 2.003 OPBR Is there a Record PCB in this channel slot? 2.004 JMPF 3.002 2.005 DISP Connect Fluke 5100B to CHANNEL 2 2.006 HEAD {Channel 2} 2.007 CALL SNR_Setup 2.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 3.001 HEAD { } 3.002 DISP Select CHANNEL 3 3.003 OPBR Is there a Record PCB in this channel slot? 3.004 JMPF 4.002 3.005 DISP Connect Fluke 5100B to CHANNEL 3 3.006 HEAD {Channel 3} 3.007 CALL SNR_Setup 3.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 4.001 HEAD { } 4.002 DISP Select CHANNEL 4 4.003 OPBR Is there a Record PCB in this channel slot? 4.004 JMPF 5.002 4.005 DISP Connect Fluke 5100B to CHANNEL 4 4.006 HEAD {Channel 4} 4.007 CALL SNR_Setup 4.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 5.001 HEAD { } 5.002 DISP Select CHANNEL 5 5.003 OPBR Is there a Record PCB in this channel slot? 5.004 JMPF 6.002 5.005 DISP Connect Fluke 5100B to CHANNEL 5 5.006 HEAD {Channel 5} 5.007 CALL SNR_Setup 5.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 6.001 HEAD { } 6.002 DISP Select CHANNEL 6 6.003 OPBR Is there a Record PCB in this channel slot? 6.004 JMPF 7.002 6.005 DISP Connect Fluke 5100B to CHANNEL 6 6.006 HEAD {Channel 6} 6.007 CALL SNR_Setup 6.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 7.001 HEAD { } 7.002 DISP Select CHANNEL 7 7.003 OPBR Is there a Record PCB in this channel slot? 7.004 JMPF 8.002 7.005 DISP Connect Fluke 5100B to CHANNEL 7 7.006 HEAD {Channel 7} 7.007 CALL SNR_Setup 7.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 8.001 HEAD { } 8.002 DISP Select CHANNEL 8 8.003 OPBR Is there a Record PCB in this channel slot? 8.004 JMPF 9.002 8.005 DISP Connect Fluke 5100B to CHANNEL 8 8.006 HEAD {Channel 8} 8.007 CALL SNR_Setup 8.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 9.001 HEAD { } 9.002 DISP Select CHANNEL 9 9.003 OPBR Is there a Record PCB in this channel slot? 9.004 JMPF 10.002 9.005 DISP Connect Fluke 5100B to CHANNEL 9 9.006 HEAD {Channel 9} 9.007 CALL SNR_Setup 9.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 10.001 HEAD { } 10.002 DISP Select CHANNEL 10 10.003 OPBR Is there a Record PCB in this channel slot? 10.004 JMPF 11.002 10.005 DISP Connect Fluke 5100B to CHANNEL 10 10.006 HEAD {Channel 10} 10.007 CALL SNR_Setup 10.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 11.001 HEAD { } 11.002 DISP Select CHANNEL 11 11.003 OPBR Is there a Record PCB in this channel slot? 11.004 JMPF 12.002 11.005 DISP Connect Fluke 5100B to CHANNEL 11 11.006 HEAD {Channel 11} 11.007 CALL SNR_Setup 11.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 12.001 HEAD { } 12.002 DISP Select CHANNEL 12 12.003 OPBR Is there a Record PCB in this channel slot? 12.004 JMPF 13.002 12.005 DISP Connect Fluke 5100B to CHANNEL 12 12.006 HEAD {Channel 12} 12.007 CALL SNR_Setup 12.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 13.001 HEAD { } 13.002 DISP Select CHANNEL 13 13.003 OPBR Is there a Record PCB in this channel slot? 13.004 JMPF 14.002 13.005 DISP Connect Fluke 5100B to CHANNEL 13 13.006 HEAD {Channel 13} 13.007 CALL SNR_Setup 13.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 14.001 HEAD { } 14.002 DISP Select CHANNEL 14 14.003 OPBR Is there a Record PCB in this channel slot? 14.004 JMPF 15.002 14.005 DISP Connect Fluke 5100B to CHANNEL 14 14.006 HEAD {Channel 14} 14.007 CALL SNR_Setup 14.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 15.001 HEAD { } 15.002 DISP Select CHANNEL 15 15.003 OPBR Is there a Record PCB in this channel slot? 15.004 JMPF 16.002 15.005 DISP Connect Fluke 5100B to CHANNEL 15 15.006 HEAD {Channel 15} 15.007 CALL SNR_Setup 15.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 16.001 HEAD { } 16.002 DISP Select CHANNEL 16 16.003 OPBR Is there a Record PCB in this channel slot? 16.004 JMPF 17.002 16.005 DISP Connect Fluke 5100B to CHANNEL 16 16.006 HEAD {Channel 16} 16.007 CALL SNR_Setup 16.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 17.001 HEAD { } 17.002 DISP Select CHANNEL 17 17.003 OPBR Is there a Record PCB in this channel slot? 17.004 JMPF 18.002 17.005 DISP Connect Fluke 5100B to CHANNEL 17 17.006 HEAD {Channel 17} 17.007 CALL SNR_Setup 17.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 18.001 HEAD { } 18.002 DISP Select CHANNEL 18 18.003 OPBR Is there a Record PCB in this channel slot? 18.004 JMPF 19.002 18.005 DISP Connect Fluke 5100B to CHANNEL 18 18.006 HEAD {Channel 18} 18.007 CALL SNR_Setup 18.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 19.001 HEAD { } 19.002 DISP Select CHANNEL 19 19.003 OPBR Is there a Record PCB in this channel slot? 19.004 JMPF 20.002 19.005 DISP Connect Fluke 5100B to CHANNEL 19 19.006 HEAD {Channel 19} 19.007 CALL SNR_Setup 19.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 20.001 HEAD { } 20.002 DISP Select CHANNEL 20 20.003 OPBR Is there a Record PCB in this channel slot? 20.004 JMPF 21.002 20.005 DISP Connect Fluke 5100B to CHANNEL 20 20.006 HEAD {Channel 20} 20.007 CALL SNR_Setup 20.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 21.001 HEAD { } 21.002 DISP Select CHANNEL 21 21.003 OPBR Is there a Record PCB in this channel slot? 21.004 JMPF 22.002 21.005 DISP Connect Fluke 5100B to CHANNEL 21 21.006 HEAD {Channel 21} 21.007 CALL SNR_Setup 21.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 22.001 HEAD { } 22.002 DISP Select CHANNEL 22 22.003 OPBR Is there a Record PCB in this channel slot? 22.004 JMPF 23.002 22.005 DISP Connect Fluke 5100B to CHANNEL 22 22.006 HEAD {Channel 22} 22.007 CALL SNR_Setup 22.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 23.001 HEAD { } 23.002 DISP Select CHANNEL 23 23.003 OPBR Is there a Record PCB in this channel slot? 23.004 JMPF 24.002 23.005 DISP Connect Fluke 5100B to CHANNEL 23 23.006 HEAD {Channel 23} 23.007 CALL SNR_Setup 23.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 24.001 HEAD { } 24.002 DISP Select CHANNEL 24 24.003 OPBR Is there a Record PCB in this channel slot? 24.004 JMPF 25.002 24.005 DISP Connect Fluke 5100B to CHANNEL 24 24.006 HEAD {Channel 24} 24.007 CALL SNR_Setup 24.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 25.001 HEAD { } 25.002 DISP Select CHANNEL 25 25.003 OPBR Is there a Record PCB in this channel slot? 25.004 JMPF 26.002 25.005 DISP Connect Fluke 5100B to CHANNEL 25 25.006 HEAD {Channel 25} 25.007 CALL SNR_Setup 25.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 26.001 HEAD { } 26.002 DISP Select CHANNEL 26 26.003 OPBR Is there a Record PCB in this channel slot? 26.004 JMPF 27.002 26.005 DISP Connect Fluke 5100B to CHANNEL 26 26.006 HEAD {Channel 26} 26.007 CALL SNR_Setup 26.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 27.001 HEAD { } 27.002 DISP Select CHANNEL 27 27.003 OPBR Is there a Record PCB in this channel slot? 27.004 JMPF 28.002 27.005 DISP Connect Fluke 5100B to CHANNEL 27 27.006 HEAD {Channel 27} 27.007 CALL SNR_Setup 27.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 28.001 HEAD { } 28.002 DISP Select CHANNEL 28 28.003 OPBR Is there a Record PCB in this channel slot? 28.004 JMPF 29.002 28.005 DISP Connect Fluke 5100B to CHANNEL 28 28.006 HEAD {Channel 28} 28.007 CALL SNR_Setup 28.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 29.001 HEAD { } 29.002 DISP Select CHANNEL 29 29.003 OPBR Is there a Record PCB in this channel slot? 29.004 JMPF 30.002 29.005 DISP Connect Fluke 5100B to CHANNEL 29 29.006 HEAD {Channel 29} 29.007 CALL SNR_Setup 29.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 30.001 HEAD { } 30.002 DISP Select CHANNEL 30 30.003 OPBR Is there a Record PCB in this channel slot? 30.004 JMPF 31.002 30.005 DISP Connect Fluke 5100B to CHANNEL 30 30.006 HEAD {Channel 30} 30.007 CALL SNR_Setup 30.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 31.001 HEAD { } 31.002 DISP Select CHANNEL 31 31.003 OPBR Is there a Record PCB in this channel slot? 31.004 JMPF 32.002 31.005 DISP Connect Fluke 5100B to CHANNEL 31 31.006 HEAD {Channel 31} 31.007 CALL SNR_Setup 31.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 32.001 HEAD { } 32.002 DISP Select CHANNEL 32 32.003 OPBR Is there a Record PCB in this channel slot? 32.004 JMPF 33.002 32.005 DISP Connect Fluke 5100B to CHANNEL 32 32.006 HEAD {Channel 32} 32.007 CALL SNR_Setup 32.008 MEMC dB -100U #! T.U.R. not calculated because System Uncertainty not available. 33.001 HEAD { } 33.002 END #! T.U.R.s less than 4.00: 0 #! T.U.R.s estimated using RANGE value: 0 #! T.U.R.s not calculated (ASK- U): 0 #! T.U.R.s not computable at compile time: 32 #! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING. #Accuracy statement is in subroutine SNR_setup